YRC-8X is a highly automatic fifive-axis linkage cutting machine for dry type, which can process most materials in dental technology with the highest precision, fully automatic material change, 24-hour uninterrupted production, bringing more effificiency to users experience.
Machinable Materials:
zirconia block ,pmma ,wax ,composite material
zirconia block ,pmma ,wax ,composite material
Machinable type:
Veneers, inlays, onlays, full crowns, temporary restorations, 3-4 unit bridges (zirconia/resin), upper implant restorations.
Veneers, inlays, onlays, full crowns, temporary restorations, 3-4 unit bridges (zirconia/resin), upper implant restorations.
Premium performance: Stable performance, smooth processing without lag; High precision, more perfect cutting products; Industrial precision ball screw; ·Precision full servo drive system;
YRC-8X has a full set of intelligent sensing equipment to deal with various situations in different situations; The tool life detection system enables you to know more about your tool condition and is convenient to replace at any time; Excellent after-sales engineer team, 24H online to provide you with high-quality service;
Equipment maintenance
1.Sum:Regular maintenance and maintenance can ensure the quality of equipment processing and increase service life..
2.regular cleaning:Use a suitable liquid detergent to clean the plastic part, and be careful not to use an air gun to clean the
interior to prevent dust and debris from entering the mechanical parts.
3.Material fixture cleaning:When placing the material, ensure that the fixtures and screws are clean for optimal clamping.
4.Main Axis Clip Cleaning:Do not spray oily spray or compressed air containing oil and water directly on the spindle head;
the spindle chuck and bur must be clean. The entry of impurities can cause processing failures.
5.Regularly check hoses, cables and connections;
1.Sum:Regular maintenance and maintenance can ensure the quality of equipment processing and increase service life..
2.regular cleaning:Use a suitable liquid detergent to clean the plastic part, and be careful not to use an air gun to clean the
interior to prevent dust and debris from entering the mechanical parts.
3.Material fixture cleaning:When placing the material, ensure that the fixtures and screws are clean for optimal clamping.
4.Main Axis Clip Cleaning:Do not spray oily spray or compressed air containing oil and water directly on the spindle head;
the spindle chuck and bur must be clean. The entry of impurities can cause processing failures.
5.Regularly check hoses, cables and connections;
